SAVE AS PDF
Lyve Mobile Array User Manual
Lyve Mobile Array 

Was this content helpful?

Status LED

The LED on the front of the enclosure indicates the device's status. See the key below for the color and animations associated with each status.

Key

Status Color 1 Color 2 Animation Description
Off   N/A Steady Device is powered off.
Identification     Breathe A Lyve Client user has sent a prompt to identify the device.
Error   N/A Steady Error reported.
Warning     Blink Warning reported.
Manual power off     Fade out A user initiated a manual power off.
Drive locked   N/A Circular Drive is locked.
Configuration   N/A Steady Lyve Client is configuring the device.
Ingest   N/A Circular Lyve Client is copying/moving data.
I/O     Breathe Input/output activity.
Ready   N/A Steady Device is ready.
Booting  White   Blink Device is starting up.

Note on amber warning

Disconnecting and reconnecting Lyve Mobile Array from its power supply can solve the issue.

If Lyve Mobile Array is inserted into a Lyve Mobile Rackmount Receiver, pull on the handle to remove it partially from the slot. This disconnects it from the port connections, including power. Wait 20 seconds and then push it back into the slot gently and firmly to make the proper connections.

If Lyve Mobile Array is inserted in a Lyve Mobile Mount and connected to a PCIe adapter, remove the device from the mount and wait 20 seconds before reconnecting.